← IPv6 Subnets

Special

fec0::/10 – Site-Local (Deprecated)

The original IPv6 private range, deprecated by RFC 3879 in 2004 because its ambiguity caused routing problems. It was replaced by Unique Local Addresses and should not be used.

Rangefec0:: – feff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
Total Addresses332,306,998,946,228,968,225,951,765,070,086,144
Prefix Length/10

That is ≈ 3.3 × 1035 addresses.

Advertisement Slot

Complete Breakdown for fec0::/10

CIDR Notationfec0::/10
Expanded Networkfec0:0000:0000:0000:0000:0000:0000:0000
First Addressfec0::
Last Addressfeff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
Last Address (expanded)feff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
Prefix Maskffc0::
Network / Host Bits10 / 118
Total Addresses332,306,998,946,228,968,225,951,765,070,086,144
/64 Subnets Inside18,014,398,509,481,984
Reverse DNS ZoneNot on a nibble boundary

Route & Firewall Examples for fec0::/10

Linux ip -6 & ip6tables

ip -6 route add fec0::/10 via fe80::1 dev eth0
ip6tables -A INPUT -s fec0::/10 -j ACCEPT

Cisco IOS ACL

ipv6 access-list ALLOW-RANGE
 permit ipv6 fec0::/10 any

Windows Firewall (PowerShell)

New-NetFirewallRule -DisplayName "Allow fec0::/10" -Direction Inbound -RemoteAddress "fec0::/10" -Action Allow

Frequently Asked Questions about fec0::/10

What is fec0::/10 used for?

The original IPv6 private range, deprecated by RFC 3879 in 2004 because its ambiguity caused routing problems. It was replaced by Unique Local Addresses and should not be used.

How many addresses are in fec0::/10?

fec0::/10 contains 332,306,998,946,228,968,225,951,765,070,086,144 addresses, using a /10 prefix with 118 host bits.

What are the first and last addresses of fec0::/10?

The range runs from fec0:: to feff:ffff:ffff:ffff:ffff:ffff:ffff:ffff.


← fe80::/10 ff00::/8 →