← IPv6 Subnets • /64 Prefix Guide

Special

100::/64 – Discard-Only Prefix

Reserved by RFC 6666 for discarding traffic. Networks use it for remotely triggered black hole routing: routing a target address to 100::/64 drops the traffic.

Range100:: – 100::ffff:ffff:ffff:ffff
Total Addresses18,446,744,073,709,551,616
Prefix Length/64

That is ≈ 1.8 × 1019 addresses.

Advertisement Slot

Complete Breakdown for 100::/64

CIDR Notation100::/64
Expanded Network0100:0000:0000:0000:0000:0000:0000:0000
First Address100::
Last Address100::ffff:ffff:ffff:ffff
Last Address (expanded)0100:0000:0000:0000:ffff:ffff:ffff:ffff
Prefix Maskffff:ffff:ffff:ffff::
Network / Host Bits64 / 64
Total Addresses18,446,744,073,709,551,616
/64 Subnets Inside1
Reverse DNS Zone0.0.0.0.0.0.0.0.0.0.0.0.0.0.1.0.ip6.arpa

Route & Firewall Examples for 100::/64

Linux ip -6 & ip6tables

ip -6 route add 100::/64 via fe80::1 dev eth0
ip6tables -A INPUT -s 100::/64 -j ACCEPT

Cisco IOS ACL

ipv6 access-list ALLOW-RANGE
 permit ipv6 100::/64 any

Windows Firewall (PowerShell)

New-NetFirewallRule -DisplayName "Allow 100::/64" -Direction Inbound -RemoteAddress "100::/64" -Action Allow

Frequently Asked Questions about 100::/64

What is 100::/64 used for?

Reserved by RFC 6666 for discarding traffic. Networks use it for remotely triggered black hole routing: routing a target address to 100::/64 drops the traffic.

How many addresses are in 100::/64?

100::/64 contains 18,446,744,073,709,551,616 addresses, using a /64 prefix with 64 host bits.

What are the first and last addresses of 100::/64?

The range runs from 100:: to 100::ffff:ffff:ffff:ffff.


← 64:ff9b:1::/48 2000::/3 →