← IPv6 Subnets • /48 Prefix Guide

Transition

64:ff9b:1::/48 – Local-Use NAT64 Prefix

A prefix reserved by RFC 8215 for local-use IPv4/IPv6 translation. It is not globally routable and is meant for use inside a single network.

Range64:ff9b:1:: – 64:ff9b:1:ffff:ffff:ffff:ffff:ffff
Total Addresses1,208,925,819,614,629,174,706,176
Prefix Length/48

That is ≈ 1.2 × 1024 addresses.

Advertisement Slot

Complete Breakdown for 64:ff9b:1::/48

CIDR Notation64:ff9b:1::/48
Expanded Network0064:ff9b:0001:0000:0000:0000:0000:0000
First Address64:ff9b:1::
Last Address64:ff9b:1:ffff:ffff:ffff:ffff:ffff
Last Address (expanded)0064:ff9b:0001:ffff:ffff:ffff:ffff:ffff
Prefix Maskffff:ffff:ffff::
Network / Host Bits48 / 80
Total Addresses1,208,925,819,614,629,174,706,176
/64 Subnets Inside65,536
Reverse DNS Zone1.0.0.0.b.9.f.f.4.6.0.0.ip6.arpa

Route & Firewall Examples for 64:ff9b:1::/48

Linux ip -6 & ip6tables

ip -6 route add 64:ff9b:1::/48 via fe80::1 dev eth0
ip6tables -A INPUT -s 64:ff9b:1::/48 -j ACCEPT

Cisco IOS ACL

ipv6 access-list ALLOW-RANGE
 permit ipv6 64:ff9b:1::/48 any

Windows Firewall (PowerShell)

New-NetFirewallRule -DisplayName "Allow 64:ff9b:1::/48" -Direction Inbound -RemoteAddress "64:ff9b:1::/48" -Action Allow

Frequently Asked Questions about 64:ff9b:1::/48

What is 64:ff9b:1::/48 used for?

A prefix reserved by RFC 8215 for local-use IPv4/IPv6 translation. It is not globally routable and is meant for use inside a single network.

How many addresses are in 64:ff9b:1::/48?

64:ff9b:1::/48 contains 1,208,925,819,614,629,174,706,176 addresses, using a /48 prefix with 80 host bits.

What are the first and last addresses of 64:ff9b:1::/48?

The range runs from 64:ff9b:1:: to 64:ff9b:1:ffff:ffff:ffff:ffff:ffff.


← 64:ff9b::/96 100::/64 →