← IPv6 Subnets • /96 Prefix Guide

Transition

64:ff9b::/96 – NAT64 Well-Known Prefix

The well-known prefix from RFC 6052 used by NAT64 gateways and DNS64 to let IPv6-only clients reach IPv4 servers. The IPv4 address is embedded in the last 32 bits.

Range64:ff9b:: – 64:ff9b::ffff:ffff
Total Addresses4,294,967,296
Prefix Length/96

That is ≈ 4.2 × 109 addresses.

Advertisement Slot

Complete Breakdown for 64:ff9b::/96

CIDR Notation64:ff9b::/96
Expanded Network0064:ff9b:0000:0000:0000:0000:0000:0000
First Address64:ff9b::
Last Address64:ff9b::ffff:ffff
Last Address (expanded)0064:ff9b:0000:0000:0000:0000:ffff:ffff
Prefix Maskffff:ffff:ffff:ffff:ffff:ffff::
Network / Host Bits96 / 32
Total Addresses4,294,967,296
/64 Subnets Inside—
Reverse DNS Zone0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.b.9.f.f.4.6.0.0.ip6.arpa

Route & Firewall Examples for 64:ff9b::/96

Linux ip -6 & ip6tables

ip -6 route add 64:ff9b::/96 via fe80::1 dev eth0
ip6tables -A INPUT -s 64:ff9b::/96 -j ACCEPT

Cisco IOS ACL

ipv6 access-list ALLOW-RANGE
 permit ipv6 64:ff9b::/96 any

Windows Firewall (PowerShell)

New-NetFirewallRule -DisplayName "Allow 64:ff9b::/96" -Direction Inbound -RemoteAddress "64:ff9b::/96" -Action Allow

Frequently Asked Questions about 64:ff9b::/96

What is 64:ff9b::/96 used for?

The well-known prefix from RFC 6052 used by NAT64 gateways and DNS64 to let IPv6-only clients reach IPv4 servers. The IPv4 address is embedded in the last 32 bits.

How many addresses are in 64:ff9b::/96?

64:ff9b::/96 contains 4,294,967,296 addresses, using a /96 prefix with 32 host bits.

What are the first and last addresses of 64:ff9b::/96?

The range runs from 64:ff9b:: to 64:ff9b::ffff:ffff.


← ::ffff:0:0/96 64:ff9b:1::/48 →